Instructions for use Multiplex Trio drain / overflow Visign MT3 / MT5
GB
Model
L
H
6161.50 / 6161.51 / 6161.52
6161.60 / 6161.61 / 6161.62
6161.70 / 6161.71 / 6161.72
100 - 260
130 - 370
100 - 680
180 - 400
180 - 430
180 - 480
C
Dimensions
D
Backflow situation:
If an underpressure situ-
ation should occur when
the bathtub is filled,
there is a risk that water
from the tub will flow
back into the drinking
water system.
Installation diagram
Connecting set with
concealed pipe inter-
rupter DN 20 in acc.
DIN EN 1717 DB
model 6161.86
Pipe interrupter
Safeguard drinking water from contamination.
The drinking water quality must not be affected by bath water flowing back into the
drinking water system. To prevent contamination, a pipe interrupter must be installed
between the concealed shut-off fitting and the bathtub inlet. Local standards and
regulations must be observed.
Note:
The pipe interrupter is not included in the scope of delivery and must be ordered
separately!
37
B
Parts
Connecting
adapter
Overflow unit
Profile seal
Seal
(only for use with
steel bathtubs)
Inlet flange
Flange cover
Fastening screw
Rotatable collar
Valve cone
Fastening screw
Valve top
Profile seal
Wedge seal
Sliding ring
Union nut
p
Drainage elbow 40/50
q
Odour trap
Wedge seal
s
Sliding ring
t
Union nut
u
21
Bowden wire
u
22
Overflow pipe
u
23
Sleeve
573226_Visign_MT3_MT5.indd 37
04.03.15 13:13