Bestimmungsgemäße Verwendung
Q
Q
dieser Text....
Intended use
Multiplex Trio is a combined inlet, drain and overflow unit for bathtubs with a 52-mm
drain hole. It meets the requirements of DIN EN 274. It is exclusively designed for
household wastewater with a short-term temperature of 95°C.
Introducing other liquids such as cleaning agents that could damage sanitary
equipment, drain parts and pipe materials, especially those with a pH value of less
than 4, is not permitted. Installation must only be performed by specialist companies
in compliance with local building code.
Drainage capacity: 0.87 l/s at 300 mm accumulation height
Overflow capacity: 0.63 l/s at 60 mm accumulation height over the middle overflow
hole
Caution: Safeguard drinking water from contamination.
To prevent contamination of drinking water caused by bath water flowing back
into the drinking water system, a pipe interrupter must be installed between the
concealed shut-off fitting and the bathtub inlet. Local standards and regulations
must be observed.
This instruction manual should be given to the building owner after assembly.
35
GB
Instructions for use Multiplex Trio drain / overflow Visign MT3 / MT5
573226_Visign_MT3_MT5.indd 35
04.03.15 13:13