Fig. 6: Colour combinations of status LEDs
Status / description of problem
Solution
1
The press machine is switched off.
—
2
The press machine is ready for operation.
—
3
The internal memory of the press machine is
almost full to capacity. The data on the last
pressings (maximum 1000) were unable to be
saved online.
Connect the press machine connected to the
app using Bluetooth®. Connect the end device
to the Internet to transmit the data.
4
The press machine is in standby mode.
—
5
The number of pressings per service interval
has been reached (40000).
Send the press machine to your nearest service
partner for inspection and maintenance.
Note: The safety shutdown occurs after a fur‐
ther 2,000 pressings.
6
The press machine has made 42000 pressings.
The safety shutdown is activated.
Send the press machine to your nearest service
partner for inspection and maintenance.
7
The press machine has a fault.
Remove and re-insert the rechargeable battery.
If the LED continues to illuminate, send the
press machine to your nearest service partner
for inspection and maintenance.
8
Press machine and/or rechargeable battery is
outside the recommended temperature range.
Bring the press machine to the recommended
temperature range in a well-ventilated environ‐
ment (-5°C to 50°C).
9
Retaining bolt not correctly closed.
Slide the retaining bolt in fully (up to the lock).
10
Battery charge too low.
Charge or replace the battery.
11
The press machine is connected (Service
mode).
—
12
Briefly illuminated, Smart Cycle is activated.
Switch on/off the function in the app.
Product information
Pressgun 6 PlusPress machine with rechargeable battery and Bluetooth interface
19
