▶
Use the adhesive strips fastened at the rear to fix the BMS module
between the two odour traps on the basic holder system of the con‐
trol.
▶
Connect the plug of the BMS module with the yellow plug of the
control.
For more information on the BMS module 2241.68, refer to the instruc‐
.
The device is delivered with all components connected.
1
3
2
4
5
6
7
15
13
14
16
17
18
11
10
12
9
8
1 -
connection for 12 V power supply
2 -
LED indicator for operating status
3 -
Connection for multi-functional sensor flushing section (blue)
4 -
Connection for magnet valve flushing section (blue)
5 -
RJ-45 interface for connection to an end device
6 -
Connection for flow sensor flushing section (blue)
7 -
Connection for backflow sensor flushing section (blue)
8 -
Battery compartment cover
9 -
3 V battery type CR2032
10 - Cable terminal / cable entry
11 - Connection for backflow sensor flushing section (red)
12 - Connection for flow sensor flushing section (red)
13 - Terminal with potential-free contacts for alarm devices and reset
Mounting the BMS module
Control connections
Handling
Flushing station with Viega technology
32
