3.2.4
Required accessories
For commissioning and configuring the flushing station, you will need:
n
Either laptop computer, smartphone or tablet computer (note the
Chapter 2.4.4 „Technical data“
).
Operating the control only via display is possible as well.
3.3
Assembly
3.3.1
Mounting the base
The flushing station is delivered pre-assembled and ready for connec‐
tion. All components are mounted to the base and have been tested for
leak tightness and proper function.
The flushing station is delivered packaged in a cardboard box. This box
is later used for site protection (also see
Take care not to damage the cardboard box, it will be
required later.
▶
Do not remove the cardboard box until you are ready to mount the
device.
▶
Put the cardboard box in a dry and clean space for interim storage.
To give you a better view, an empty base is shown for the
following assembly steps.
Use Steptec slot nuts model 8437.90 for assembly.
Site protection
Fig. 8: Protective cardboard box,
delivery condition
Viega Steptec
Handling
Flushing station with Viega technology
20
