Vidos Duo S1101A, User Manual

Page: 21 / 26

-19-
Basic IN-OUT Wiring in Standard Mode
Connecting Multi Monitors
WIRING
ID=0
Code= 0 , DIP6=off
Code= 2 , DIP6=off
Code= 3 , DIP6=on
BUS(IM) BUS(DS)
P 26/40
AC~
100~240VAC
Code=1, DIP6=off
RF CARD
-20-
• The door station is also compatible with other monitors which are provided by our company.
• It can be extended 3 slave monitors for each monitor.(Better use with extra ds t iributor for the
extension)
WIRING
M-SM4
A
B C D
B5 M-SM4
OFF ON
Impedance
switch
BUS(IM) BUS(DS)
Code=0
，
DIP6=on C o d e = 1
，
DIP6=on
Code=2
，
DIP6=on C o d e = 3
，
DIP6=on
ID=0
RF CARD
P26/40
AC~
100~240VAC
Optional functional module
M-3F
M-3F: bus amplifier module
B5: staircase light controller module
M-SM4: 4 inputs branch distributor
Star Topology Wiring With M-SM4 in Standard Mode
Setting the address of monitors for:
1. door station for one and two houses
First house
- the first monitor must have the address 0 ,
another monitors from 1 to 12 . In this we will get
the addressed intercom.
We can install in one house up to 13 monitors.
- set the same address
0 at all monitors.
First as MASTER, another 3 monitors as
SLAVE 1, 2, 3. In this way we will get the internal
unaddressed intercom
Second house
- the first monitor must have the address 16 ,
another set from 17 to 28 . In this we will get the
addressed intercom.
We can install in one house up to 13 monitors.
- set the same address
16 to all monitors. First set
at MASTER, another 3 monitors on
SLAVE 1, 2, 3. In this way we will get
internal unaddressed intercom.
2. door station for three and four houses
First house- address 01
Second house - address 02
Third house - address 03
Fourth house - address 04
Set the same address for all monitors in one house.
First as MASTER, further on SLAVE 1, 2 or 3
For the last monitor connected to the
system, DIP6 should set to ON.