-5-
PARTS AND FUNCTIONS
Terminal description
Lock Control Jumper:
To select the lock type.
Motion Detector Connect Port:
To connect external PIR motion detector
with DC12V voltage
and load up to 350mA.
.
Main Connect Port:
To connect the bus line and the electronic locks.
• L1,L2: Connect to the bus line, no polarity.
• PL: External lock power input, connect to the power positive(power +).
• S+: Lock power(+) output.
• S-: Lock power(-) output, connect to the power(-) input of locks(only when using the door
station to power the locks, if using the external power supply for the locks, the S- will not be
connected).
1 2 3
Lock Control Jumper
PIR Motion Detector
Connect Port
+12V
GND
PIR
L1 L2
PL S+
S-
Main Connect Port
-6-
BASIC FUNCTIONS
Unlock Operations
Unlocking of ID Card
When the registered user card has been shown to ID card window, the UNLOCK indicator lights
up, the buzzer sounds,and the electric door strike is unlocked.
• If show the authorized user card,the buzzer will sound of beep+,and the UNLOCK indicator
will light up.
• If show the unauthorized user card,the buzzer will sound of beep,beep,beep.
Fisheye Camera
External Motion Detection
Please note that this function requires the
monitor with fi sheye function to support.
The angle view is 170
0
,visitors in this angle
view can be seen clearly and can be zoomed
to see individuals up close via indoor monitor
with fi sheye function.
The door station is equipped with a terminal to
connect external motion detector.
If the external motion detector is connected
to the system,following functions will be effec-
tive:
If detect someone passing by, the door station
can be activated operation to unlock or turn
on light.
Standard
door station angle
170
0
door camera angle
(Wide angle view shown)
12V
Motion
detector
GND
PIR
S1100A
Models S1101A / S1102A / S1103A / 1104A are equipped with a lens with 105 ° viewing angle in width
Models S1201A / S1202A / S1203A / 1204A are equipped with a lens with 170 ° viewing angle in width..
Specifications of the output:
voltage: DC12V
load: up to 350mA
IMPORTANT!
Motion detection is an additional function, that can be controlled and configured from a monitor adapted
to its operation. (M1021)
