Installation
Vision Model 140/150 Owner’s Operating Manual
39
PRE
L
IMINAR
Y
3.9
Adjusting the Picture
Orientation
By default, the Vision 140/150 is configured for a “floor/front” installation, in which the
projector is installed upright and in front of the screen. If it is installed behind the screen
and/or mounted on a ceiling, you must change the picture orientation. To do this:
1.
Select an input OTHER THAN HDMI 1 or HDMI 2 on the VHD Controller.
2.
On the VHD Controller, press
MENU
and enter the Service Menu passcode.
3.
Select
Service
from the Main Menu.
4.
Select
Display Device
from the Service Menu.
5.
Select
Configure
from the Display Device menu, then select
Installation
.
6.
Choose Floor/Rear, Ceiling/Front or Ceiling/Rear, to match the installation method.
3.10
Primary Lens Adjustments
To access the motorized primary lens controls:
1.
On the VHD Controller, press
MENU
and enter the Service Menu passcode.
2.
Select
Service
from the Main Menu.
3.
Select
Display Device
from the Service Menu.
4.
Select
Configure
from the Display Device menu, then select
Lens
.
The Lens menu gives you a great deal of control over the picture size, position and focus:
Focus
To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press
and hold the
ENTER
button.
Zoom
To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
(-). Then, press and hold the
ENTER
button.
To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). Then,
press and hold the
ENTER
button.
Vertical and Horizontal Lens
Shift
To change the lens position, use the cursor buttons to highlight “Left,” “Right,” “Up” or
“Down” in the Lens menu. Then, press and hold the
ENTER
button to shift the lens in that
direction.
Summary of Contents for 140/150
