Maintenance and Troubleshooting
88
Vision Model 140/150 Owner’s Operating Manual
PRE
L
IMINAR
Y
Power and Cooling
46
Red DMD heat sink overheated.
47
Green DMD heat sink overheated.
4
8
Blue DMD heat sink overheated.
49
Prism overheated.
4C
Projector shutdown due to critical error.
C0
Lamp blower failure (lamp not turned on).
51
LVPS fan failed (Fan 1).
52
LVPS/Red cooling fan failed (Fan 2).
53
DC lamp fan failed (Vision 140; Fan 3).
54
Red DMD heatsink fan failed (Fan 4).
55
Green DMD heatsink fan failed (Fan 5).
56
Blue DMD heatsink fan failed (Fan 6).
57
TIPM fan failed (Fan 7).
5
8
TIPM fan failed (Fan
8
).
Table 5-2. Vision 140/150 Error Codes (continued)
Code
Description
Note:
To clear a system error, press the
EXIT
key (on the projector’s rear-panel keypad) twice. If necessary,
reset the projector by powering it off, allowing it to cool and powering it on again. Contact your Vidikron
dealer or Vidikron technical support if the error persists.
Summary of Contents for 140/150
