Videotec GEKO IRH, Instruction Manual

Page: 9 / 64

Instruc
tions manual - English - EN
7 MNVCIRHS_1511_EN
Fasten the illuminator, complete with its bracket,
using the screw, the nut and the washer supplied.
Fig. 6
Set the illuminator’s vertical and horizontal
inclination by adjusting the two fastening screws.
Fig. 7
Check the resulting illumination range on the screen.
Tighten all the screws.
6.2.2 Installation of housing-fitted
illuminator (OSUPPIR kit)
Fasten the plate (01) between the bottom of the
housing (02) and the bracket (03) using the screws
supplied (04).
02
01
04
03
Fig. 8
Fasten the illuminator (complete with its bracket)
using the nut and the washer.
Fig. 9
Set the vertical and horizontal inclination (Fig. 7,
page 7).
Check the resulting illumination range on the screen.
Tighten all the screws.
6.2.3 Connections
Power supply
and control
Photocell Switch-on
threshold
regulator
Fig. 10