Page 3 DTMRX1 1600
Operating data on the rating plate
The DTMRX1 receiver is supplied with two rating plates.
The first plate contains:
•
Model identification code (Extended 3/9 bar code)
•
Power supply (Volt)
•
Frequency
(Hertz)
•
Power consumption (Watt)
The second label indicates the serial number of the model (Extended 3/9 bar code).
During the installation phase, make sure that the power supply features of the receiver correspond to the
characteristics required. The use of unsuitable devices can lead to serious risks for the safety of the personnel and the
security of the plant.
Description of the DTMRX1 receiver
The DTMRX1 receiver is a microprocessor-based command receiver for remote control of positioning devices
and motorized lenses.
Features
•
12 Functions: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS
OPEN, IRIS CLOSE, AUX
•
AUX: auxiliary clean contact 1A 230Vac, 1A 24V
Ú
Ú
Ú
Ú
•
99 identification addresses, selectable by Dip switch
•
Serial communication selectable between RS-232, RS485 and Current Loop
•
Communication rate setting (9600 / 1200 Baud)
•
RS232, RS485 and Current Loop repeater for in-cascade configuration
•
Possibility of using both polarity inversion lenses and common wire lenses
•
Optoisolated digital logic and power section
•
EEPROM for storing activated options
•
Led indicating power supplied to the unit
•
Led indicating command reception
•
Led indicating data reception
•
Power supply:
230 V~ 50Hz; 24V~ 50/60Hz:
refer to
Operating data on rating plate
•
Power
consumption:
10
W
•
Max swichtable power:
100 W
•
Power supplied to the positioning device: 230 V~ 50Hz; 24V~ 50/60Hz
refer to
Operating data on rating plate
•
Power supplied to the lens:
from 6 to 16V
Ù
ýýýýý
max 80 mA
•
Protection fuses:
F1: 1,6 AF 250V
version 24V~
F1: 250 mAF 250V
version 230V~
Compatible devices
•
DCS2, DCMT8 and DCS3: control keyboards.
•
communication
controller
DCMX: it allows the operator to control up to 8 line of receivers by means of up yo 4
control keyboards
Please refer to each user’s manual for a complete description of the features of the single units.