background image

Instruc

tion manual - English - EN

19

MNVCCOMB_2046_EN

10 Information on disposal 

and recycling

The European Directive 2012/19/EU on Waste 

Electrical and Electronic Equipment (WEEE) mandates 

that these devices should not be disposed of in the 

normal flow of municipal solid waste, but they should 

be collected separately in order to optimize the 

recovery stream and recycling of the materials that 

they contain and to reduce the impact on human 

health and the environment due to the presence of 

potentially hazardous substances.

The symbol of the crossed out bin is marked 

on all products to remember this. 

The waste may be delivered to appropriate collection 

centers, or may be delivered free of charge to the 

distributor where you purchased the equipment at 

the time of purchase of a new equivalent or without 

obligation to a new purchase for equipment with size 

smaller than 25cm (9.8in).
For more information on proper disposal of these 

devices, you can contact the responsible public 

service.

11 Troubleshooting

Contact the VIDEOTEC technical service 

or an authorized support centre if the 

problems listed below persist or you have 

any other issues that are not described 

here.

When contacting VIDEOTEC for assistance please 

provide the serial number and the identification code 

of the model.

PROBLEM 

The product does not go on.

CAUSE 

Wiring error, blown fuse.

SOLUTION 

Make sure the connections are 
correct. Check the continuity of 
the fuses and replace them with 
the indicated models should they 
fail.

Summary of Contents for COMB























































































































Reviews: