Videonics Videonics Firestore, Instruction Manual

Page: 29 / 59

VIDEONICS FIRESTORE PAGE 23
Standard Reverse Play
It is possible to playback video from FireStore in reverse at normal speeds (25
fps in PAL and 30 fps in NTSC). To begin reverse play, hold down the SHIFT/
ALT
( )
button for two seconds until it begins to FLASH. FireStore is
now in ALT mode. Then press the PLAY
( )
button. Reverse play will
begin and the following LCD display will show:
To exit FireStore's ALT mode, press the SHIFT/ALT
( )
button again
(the SHIFT/ALT button will stop Flashing). To return to normal play, press
the PLAY
( )
button or to stop playback, press the STOP
( )
button.
Single Frame Forward and Backward
It is possible to move forward and backward frame by frame with FireStore.
To go into this mode, press FireStore's SHIFT/ALT
( )
button once to
enter the SHIFT mode. The key should light up, but not FLASH. By pressing
the REWIND
( )
or FAST FORWARD
( )
button, FireStore
reverse playback speeds. The multiples are -2X,-3X, -4X, -8X, -10X, -12X, -
15X, -18X, -21X, -25X and -30X and the LCD display will reflect this with the
following:
To return to normal playback simply press the PLAY
( )
button.
Note: Some lower performance hard drives may not be able to reach some higher fast
forward and rewind speeds.