Videonics Videonics Firestore, Instruction Manual

Page: 24 / 59

PAGE 18 VIDEONICS FIRESTORE
Recording a DV input stream (cont)
The other method of recording with FireStore is to simply press FireStore's
RECORD
( )
button once. The Record Pause LCD screen will appear:
With the press of FireStore's RECORD
( )
button again, recording will
begin. Pressing the RECORD
( )
button a second time, will return
FireStore to Record Pause.
Triggering Record from a DV Camcorder
It is possible to trigger record on FireStore using the REC/REC-PAUSE but-
ton on your DV camcorder. This is done using FireStore's FIREWIRE SLAVE
MODE. To access the FireWire Slave Mode, simply select the SETUP mode
on your FireStore. You can do this by pressing FireStore's MODE
( )
button for two seconds. After two seconds, the default SETUP screen will
display which is shown below.
By pressing the MODE
( )
button, cycle through the screens until
you reach SLAVE MODE. The following LCD display will appear.
Press the FORWARD INDEX
( )
button once and you will see the fol-
lowing LCD display
Simultaneously press PLAY and
REC to start recording