
Fuzzy sensing is related to wash process. Machine will sense the cloth load.
Depending on cloth load it will select the water level internally. During the Fuzzy
sensing, Fuzzy LED will
wash in Fuzzy mode,
glow . The Fuzzy LED means
HOW TO OPERATE MACHINE IN FUZZY MODE ?
1. Put laundry in the machine.
2. Press power button to power on position.
3.
Press START/PAUSE button. Machine will sense cloth load.
4.
Put the detergent & close the lid.
5. Machine will start the operation.
Initially before switching ‘ON’ power if there is some water in the machine, then
machine will directly go to manual mode with medium water level & default
NORMAL Program, then program, or water level can be altered manually.
Press START/PAUSE switch to start operation after selecting it.
About Manual Mode
HOW TO OPERATE MACHINE IN MANUAL MODE
1.
Press power switch to ‘ON’ the machine.
2.
Select ‘PROGRAM’ depending on laundry type. If required soak can be selected.
3.
Select appropriate water level depending on laundry.
4.
Put laundry in the machine.
5.
Put the detergent.
6.
Press START/HOLD switch.
About Machine Operation
i) Machine will complete the processes in following sequence :
ii) When any Program is selected machine is set for standard cycle.
iii) Soak can be selected with wash only. If wash is cancelled soak will be cancelled
iv) Soak selection will be automatically followed by wash.
v) At the end of all selected process the buzzer will sound. & machine will shut off
Automatically (Auto off function).
SOAK
RINSE
WASH
SPIN
Notes on Using Course
1. Normal Program
: Used for normally soild clothes of daily use.
2. Strong Program
: Used for large sized laundries like curtains, bed sheets or jeans.
3. Saree Program
: Used for lightly soiled clothes like daily wear/under wear grament
or in saree.
4. Wool Program
: Used for heavily decorated clothes, Embrodered clothes woolen.
5. Soak Program : Recommended for heavily soiled clothes of daily use.
6. Soak Program
: Used for heavily soiled jeans or large sized laundries like
curtains, bedsheet etc.
7. Saree + Soak Program : Saree is generally used to wash Saree and Dhoties.
Recommended for highly soiled decorated clothes or embroidered
clothes etc.
Settings
it keeps glowing till end of wash.
automatically.
About Fuzzy Program
8. Wool + Soak Program
:
Page-6
Page-7
Operation of Full Program
SELECTION
PROGRAM
SOAK
(OPTION)
WATER LEVEL
WASH
TIME
RINSE
SPIN
RINSE 1 RINSE 2
SPIN 1
SPIN 2**
Normal
23 min.
12 min.
2 min.
Soak
Rinse
2 min.
Soak
Rinse
30 Sec.
Strong
28 min.
15 min.
2 min.
Soak
Rinse
2 min.
Soak
Rinse
30 Sec.
Saree
18 min.
7 min.
2 min.
Soak
Rinse
2 min.
Soak
Rinse
30 Sec.
Wool
13 min.
3 min.
2 min.
Soak
Rinse
30 Sec.
Water filling time depends on tap Water Pressure and selected water level.
Drain time depends on selected water level and number of rinse.
After wash program and water drain there is intermittent spin before rinse.
After first rinse again there is a intermittent spin. Total time in normal
(Soak+Wash+Rinse+Spin) cycle is approx. 51 minutes.
Ex. Dry
28 Minute*
52~56L
40~48L
28~36L
20~24L
52~56L
40~48L
28~36L
20~24L
52~56L
40~48L
52~56L
40~48L
x
x
VT60A12
VT55A11
47~52L
37~42L
27~32L
17~22L
47~52L
37~42L
27~32L
17~22L
47~52L
37~42L
47~52L
37~42L
WHAT IS MEMORY BACK UP ?
This facility is useful when there is a power failure while machine is in operation.
Due to memory back-up machine will complete the remaining part of the selected
cycle after power resumes.
HOW TO STOP CYCLE DURING OPERATION ?
If due to some reasons you want to stop the operation midway before completion
of selected cycle then pause the operation by pressing START/HOLD switch &
then press power switch to ‘OFF’ the machine.
THIS IS NOT A PROBLEM
At power ‘ON’ if machine starts any process abruptly, this may be due to stored
memory of previous program which has been stopped intermediately. In this case
to start the machine from beginning proceed as following :
1. Press power to switch ‘OFF’ the machine. This will clear the memory.
2. Again press switch ‘ON’. The machine will start from beginning.
Memory Back-Up
**
4 min SPIN 2 is applicable in Model VT55A11.
7 Min
6 Min
5 Min
4 Min
7 Min
6 Min
5 Min
4 Min
7 Min
6 Min
7 Min
6 Min
*
Ex. Dry of 28 Minute is applicable in Model VT60A12.
Summary of Contents for VT55A11
Page 2: ...Message from the Vice Chairman CEO ...
Page 4: ...Tap Tape Lock Lever Water supply hose cover A B Approx 4mm Adapter Screws 4 Water Tap ...
Page 13: ......
Page 14: ......