Page-16
Not to Forget
Don’t get water on the control panel
There is risk of electric
shock or breakdown.
Don’t put in too much detergent !
If too much detergent is used, soap
suds will be difficult to get
rid of and rinsing will be
insufficient.
When articles are used as a cover
Refrain from using chlorine
vinyl covers. They will scar
the Iacquer and resin
surfaces.
If you use a vinyl
chloride cover, place
a cloth on th machine
before putting the
cover on.
After finishing don’t forget.....
Please shut off the tap. If you are not going to
use the machine for a long period of time,
please remove the plug.
Please don’t let water
sit for a long time.
Handling and inspection of the electric
cord and plug
When pulling out the cord
and plug, hold from the
plug and pull.
Please be sure to close the lid
If the lid isn’t closed, the spin function won’t
occur and will be displayed.
Don’t put too much laundry in !
Please fold bulky clothing and put it in such a
way that it won’t stick out.
Don’t wash water-repellent
clothing and sheets.
Condensation
When the air temperature
is high but the water temperature
is low, condensation will build
up on the outside of the
washing tub and the floor
will become wet.
Page-17
Warranty terms and conditions
FILL AND DESPATCH WARRANTY CARD ELSE THE WARRANTY VOIDS
1.
This warranty is confined to the original products of the
only.
manufacturer
2.
The
or their authorised service
manufacturer
Agent / will repair / replace all parts failing due
to faulty material or defective workmanship pertaining to the above Washing Machine.
3.
Only the
or its authorised Service
manufacturer
Agent / can service/repair/attend to install/
reinstall the washing Machine. The list of
’s serivce centre is as printed overleaf.
Manufacturer
4.
If the machine is not repairable at the place of its installation then the decision of
technician to call back the machine to Service Centre for repairs shall be final. In such
cases it is the responsibility of Purchaser to bring the machine to the Service Centre.
5.
For the units installed beyond the municipal limits of the jurisdiction of the authorised
service a
’
Manufacturer
Manufacturer
s authorized service station or
’s dealers as well as
expenses incurred in connection with deputing of service personnel/technicians towards
to and fro travel conveyance with deputing of service incidentials etc. will be borne by
the customer.
6. Any change of location of the unit and / or change of ownership has to be done in
consultation with the
or its authorised service agent so that the warranty
Manufacturer
obligation for the remaining part of the warranty could be transferred to the new owners
or the original purchaser but at the new location. The unit so transferred will be inspected
by the
or its service agent at the cost inspection charges.
Manufacturer
7.
Any damage caused during shifting will be repaired on chargeable basis. In the event of
repair / replacement of any part/s of the set, this warranty will thereafter, continue and
remain in force only for the unexpired period as per the warranty card issued at the time
of purchase of the set. Moreover, the time taken for repair and in transit, whether under
the warranty or otherwise, shall not be excluded from the warranty period.
8.
This warranty will continue to be in force for the term herein specified, irrespective of
what replaced may be provided under it, and such replacement shall not attract any
fresh warranty unless specified.
9.
The warranty extended herein is in lieu of all implied conditions and warranties under the
law and is confined to the repair or replacement of defective parts and does not cover
any consequential or resulting liability, damage or loss arising from such defects.
Furthermore, the warranty in no case, shall extend to the payment or any monetary
consideration whatsoever of the replacement or return of the Washing Machine as a
whole.
10. The defective spare part/s shall be the sole property of
and will be collected
manufacturer
by the Authorised Service Centre / Franchisee.
11. It shall be the discretion of the
to replace the required part with suitable and
manufacturer
currently available part/s. The
may also use the substitute part for defective part.
manufacturer
Manufacturer of this VIDEOCON Brand Washing Machine undertake that the product is warranted
against manufacturing defects for a period of
date of purchase,
24 months, commencing from the
the manufacturer will repair or replace free
parts of the Washing Machine
of charge any part or
sole discretion, that the defect/s
material or workmanship only.
is/are due to faulty
The warranty will be governed by the following clauses :
except Top Lids, Inlet/Drain Hose and
the company be fully satisfied, in its
lint Filter, should
Summary of Contents for VT55A11
Page 2: ...Message from the Vice Chairman CEO ...
Page 4: ...Tap Tape Lock Lever Water supply hose cover A B Approx 4mm Adapter Screws 4 Water Tap ...
Page 13: ......
Page 14: ......