Videk VISIONSENSOR 2030 User Manual Download Page 33

Page: 33 / 98

K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -

Save Settings

3. - Introduction

The following chapter will allow a user to change the symbology settings on the VS 2030. To reset the unit
to factory defaults or to save the current settings please scan one of the codes below:

Save Settings

Reset to USB Factory Defaults

Reset to RS232

Clear All CodeXML Rules

Factory Defaults

Readers are shipped from manufacturing with initial communication settings that are hardware dependent.

Note:

If you do not save your settings and the VS 2030 loses power you will lose your settings.

3.2 - Aztec Symbology

Scan the following codes to enable/disable Aztec symbology settings:

Aztec On

Aztec Off (Default)

Sample Aztec Code

3.3 - Codabar Symbology

Scan the following codes to enable/disable Codabar symbology settings:

Codabar On (Default)

Codabar Off

Sample Codabar

Summary of Contents for VISIONSENSOR 2030



































































































Search results

Summary of Contents for VISIONSENSOR 2030

Reviews:

Related manuals for VISIONSENSOR 2030

Brands by name

Popular brands

Videk VISIONSENSOR 2030, User Manual

Search results

Summary of Contents for VISIONSENSOR 2030

Reviews:

Related manuals for VISIONSENSOR 2030

Brands by name

Popular brands