15
|
•
If the inside surface of the barbecue lid has the appearance
of peeling paint, baked on grease build-up has turned to
carbon and is flaking off, clean thoroughly with strong, hot
soapy water solution. Rinse with water and allow to dry
completely. NEVER USE OVEN CLEANER.
2. Interior Of Barbecue Bottom
Remove residue using brush, scraper and/or cleaning pad. Then
wash with a soapy water solution. Rinse with water and allow
to dry.
3. Cooking Grid
Use a mild soapy water solution. Non-abrasive scouring powder
can be used on stubborn stains then rinse with water.
4. Cleaning the burner assembly
•
Turn the gas OFF at the control knob and disconnect the
cylinder.
•
Remove cooling grate.
•
Clean the burner with a soft brush or blow clean with
compressed air and wipe with a cloth.
•
Clean any clogged parts with a pipe cleaner or stiff wire
such as an opened paper clip.
•
Inspect burner for any damage, cracks or holes. In case of
damage, replace with a new burner. Re-install the burner,
check to ensure that the gas valve orifices are correctly
positioned and secured inside the burner inlet (venturi).
6.2
Troubleshooting
Problem
Possible cause
Solution
Burners will not light
using the ignition
system.
LP gas cylinder is empty.
Replace with a full cylinder.
Faulty regulator.
Have regulator checked or replace.
Obstructions in the burner.
Clean burner.
Obstructions in gas jets or gas hose.
Clean jets and gas hose.
Electrode wire is loose or disconnected from electrode or
ignition unit.
Reconnect wire.
Electrode or wire is damaged.
Change electrode and wire.
Faulty push-button igniter.
Change igniter.
Burner will not light with
a match.
LP gas cylinder is empty.
Replace with a full cylinder.
Faulty regulator.
Have regulator checked or replace.
Obstructions in the burner.
Clean burner.
Obstructions in gas jets or gas hose.
Clean jets and gas hose.
Low flame or flashback
(fire in burner tube, a
hissing or roaring noise
may be heard).
LP gas cylinder too small.
Use larger cylinder.
Obstructions in the burner.
Clean burner.
Obstructions in gas jets or gas hose.
Clean jets and gas hose.
Windy conditions.
Use BBQ in a more sheltered
position.
Difficulty turning gas
valve knob.
Gas valve jammed.
Replace gas valve.
6.3 Servicing
•
Your gas barbecue should be serviced annually by a competent, authorised person.
7
Technical specifications
Item No.
44281-44286
Total Heat Input (All Gas Categories)
12.0 KW (872 g/h)
Gas Category
I3+(28-30/37)
I3B/P(30)
I3B/P(37)
I3B/P(50)
Types Of Gas
G30 Butane
G31 Propane
G30 Butane,
G31 Propane
G30 Butane,
G31 Propa
G30 Butane, G31
Propa
Gas Pressure
28-30 mbar
37 mbar
30 mbar
37 mbar
50 mbar
Injector Size
0.70mm
0.70mm
0.65mm
0.60mm
Summary of Contents for 44281
