1.
Connect the power cable‘s trapezoidal plug into the rear of the VidaPower® Ultra Injector
2.
Connect the power cable into a standard wall outlet. The unit’s
POWER
LED
should now light up, confirming power.
3.
[Optional: For data] Connect a CAT5/5e/6 cable from your non-PoE
router/switch into the Injector’s
LAN
port, for Ethernet Input.
4.
Finally, connect another CAT5/5e/6 cable into the RJ45 connector labeled
POE. (This is the POE++ Output.)
5.
At the other end of the CAT5e/6 cable, connect your 48V VidaCharger® Ultra
USB-C Adapter (or other PoE Device). The installation is now complete!
Installation Steps
Sample Wiring Diagram
AC Power Cord In
Ethernet / Data In
PoE++ Port Output
POWER
LED
