background image

- 18 -

9. Final notes

This manual is only used by those who are qualified to carry out the installation.
No given information in this manual can be considered of any interest to the end user. It is important for the
installer to show their clients correct operation using of the opener including the using of manual
disengagement cord. Inform the owner about the need of a regular and accurate maintenance, especially
regarding a regular check of the safety and reversing devices.

10. Important information for the user

Once the opener has been installed, the user must be informed about how it works and all the risks that can
arise if it is used improperly. The user must avoid placing himself/herself in dangerous situations such as
standing within the door’s operating range when it is moving.

Do not

let children play near the door, and keep the remote controls out of their reach.

All services, repairs or checks must be carried out by professionally qualified persons, and noted on a
maintenance register kept by the user.

IMPORTANT NOTE:

In the case of a malfunction the user must call an authorized installer and should not

attempt to repair it by yourself.

Summary of Contents for VR1000E

























Reviews: