Victron energy VE.Bus, Manual

Page: 17 / 209

11
E
N
N
L
F
R
D
E
E
S
S
E
4.3 Overview configuration
Use the options in the ‘Overview setup’ submenu to configure the
overview screen. First decide which type of overview will be used
(system, generator, or custom). Next, enter the corresponding submenu
and set the configuration options as required.
Overview setup menu
Item Description Default
value
Display
overview
The BPP can be configured to display the
overview screen after a certain period of
inactivity. The overview can also be displayed
by pressing the centre button when viewing
the device list, regardless of the value of this
property.
Never
Overview
type
Select the type of overview screen that will be
used. Once selected, ensure that the options
in the corresponding menu are correctly set.
System
If a device selected for an overview is listed as “Unknown”, this means
this property has been configured, but the device is no longer available
on the network. In order to display the overview, either the device must
be reconnected, or another device must be selected.