Victron energy MultiPlus 12/3000/120-16, Manual

Page: 14 / 44

Each system requires a method of disconnecting the AC and DC
circuits. If the overcurrent protection device is a circuit breaker, it
will also serve as the disconnect. If fuses are used, separate
disconnect switches will be needed between the source and the
fuses.
To reduce the risk of fire, do not connect to an ac load center (circuit
breaker panel) having multiwire branch circuits connected.
CAUTION
– To reduce risk of injury, charge only Lead Acid or
LIFEPO4 type rechargeable batteries. Other types of batteries may
burst causing personal injury and damage.
Use of an attachment not recommended or sold by the marine unit
manufacturer may result in a risk of fire, electric shock, or injury to
persons
Do not disassemble marine unit; take it to a qualified serviceman
when service or repair is required. Incorrect reassembly may result
in a risk of electric shock or fire.
To reduce risk of electric shock, unplug marine unit from outlet
before attempting any maintenance or cleaning. Turning off
controls will not reduce this risk.
WARNING
– RISK OF EXPLOSIVE GASES) WORKING IN
VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS.
BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL
BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST
IMPORTANCE THAT EACH TIME BEFORE SERVICING THE
UNIT IN THE VICINITY OF THEBATTERY, YOU READ THIS
MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY.
To reduce risk of battery explosion, follow these instructions and
those published by battery manufacturer and manufacturer of any
unit you intend to use in vicinity of battery. Review cautionary
marking on these products and on engine.