| SUNSET
VENTING METHODS
• This range hood is factory set for venting through the roof or wall.
•
Vent work can terminate either through the roof or wall.
IMPORTANT:
•
NEVER exhaust air or terminate duct work into spaces between
walls, crawl spaces, ceiling, attics or garages. All exhaust must be
ducted to the outside.
•
Use metal/aluminum duct work only.
•
Fasten all connections with sheet metal screws and tape all joints
with certified Aluminum Tape.
•
Use caulking to seal exterior wall or roof opening around the cap.
•
If the duct is running though a cold section of the house (attic space),
insultion of the duct will be required to prevent condensation (refer to
sketch below).
10
