Victory Motorcycles 2005 Kingpin, Owner'S Manual

Page: 139 / 169

136
MAINTENANCE
Check Fasteners
Visually inspect the entire motorcycle chassis and engine for loose, damaged, or missing fasteners. Tighten loose
fasteners to the proper torque (see the Specifications section of the Owner’s Manual , or the VICTORY Service
Manual ). Replace stripped, damaged, or broken fasteners with genuine VICTORY fasteners of equal size and
strength immediately.
Universal Tool (A)
The universal tool is located in a holder under the left side cover. The universal tool is a combination 6mm
hexagonal wrench with a phillips screwdriver tip, and can be used to service the following items:
Oil Drain Plug Handlebar Adjustment Belt Tension Adjusters (After loosening axle nut)
Passenger Seat Accessory Windshield Fasteners Accessory Driver’s Backrest Fasteners
Indicator Bulbs Headlight Bulb Accessory Saddlebag Fasteners
Air Filter Turn Signal Bulb
Road Test
Before returning the motorcycle to regular use, road test it in a safe environment. Pay special attention to the proper
fit and operation of all serviced components. Make any corrections or additional adjustments as necessary to ensure
safe and enjoyable vehicle performance.
Improperly installed or adjusted components can make the motorcycle unstable or hard to handle.
Improperly installed electrical components can cause engine or electrical system failure. In either
case, damage or serious injury could result.
WARNING