REINITIALIZING THE CHRONOGRAPH HANDS
Following an incorrect activate, violent impact or exposure to a
strong magnetic field, one or the other of the chronograph counter
hands may fail to revert to its original position (zero). To reinitialize
the hands, proceed as follows:
Zero Reset of the Minute Counter Hand
• Pull out the crown to position 2.
• Press pusher B briefly until the hand reverts to the
original position (on 60).
Zero Reset of the Seconds Counter Hand
• Pull out the crown to position 3.
• Press pusher A briefly until the hand reverts to the
original position (on 60).
33
•
Press pusher B to continue timing. The chronograph will con-
tinue its measurement by reverting the 1/10th hand to zero
and “flying back” to the elapsed time.
•
Press pusher B again to read the second split time.
•
Repeat this procedure until the action to be timed has been
completed.
•
Press pusher A to stop timing.
NOTE:
Timing will be indicated within 1/10th of a sec-
ond on appropriate sub-dial.
•
Once the timing operation has been stopped, press
pusher B briefly until the hands revert to the original
position. The chronograph and totalizer hands will
be reset to zero.
32