Measurement of Elapsed Times
•
Press pusher A (at 2 o’clock) to start the timing oper-
ation.
•
Press again to stop timing.
NOTE:
Timing will be indicated within 1/10th of a second on
appropriate sub-dial.
These two operations may be repeated several times, to add short
time measurements.
•
Once the timing operation has been completed,
press pusher B (at 4 o’clock) briefly until the hands
revert to the original position.
Measurement of Intermediate (Split) Times
•
Press pusher A to start timing.
•
Press pusher B to read off the first split time without
interrupting the measurement of total time.
31
until it is sealed tight into its normal position (1). The
date and time are now set.
TO SET TIME ALONE:
Unscrew the crown by turning it
toward you to get to unscrewed position (2) and refer to
instructions “C“ and “D“.
30