INSTALLATION STEPS
STEP 1
Do not stand the mirror upright on hard surfaces whilst fitting, as this will damage the corners.
Unscrew the front of the mirror from the metal back box.
ISOLATE THE MAINS POWER SUPPLY TO THE ELECTRICAL FEED THAT WILL
POWER YOUR MIRROR.
STEP 2
Put the back box on the wall, ensuring your power supply cable will reach the connection block.
Carefully mark the positions of the four mounting holes on the wall through the predrilled holes in
STEP 3
Remove the back box from the wall, and drill the four holes into the wall using a suitable drill bit.
STEP 4
STEP 2 STEP 3 STEP 4
the back box, using a pencil and a spirit level.
