1
2
VINYL RECORD OPERATION
1.
Press the Power Button to turn on the unit and open the cover.
2.
Set the Function Knob to “AUX/PH” position.
3. Detach the stylus protector by pressing both sides and pulling straight in the direction shown.
4.
Place a vinyl record on the Turntable by aligning the Turntable Spindle to the record hole.
5.
Slide the Speed Selector to 33, 45 or 78 to match the play speed of the record.
6.
Unlock the Hold Down Clip.
7.
Raise the Cue Lever to lift the Tonearm off the Tonearm support.
8.
Gently move the Tonearm to the edge of the record (or the starting point of a track).
9.
Release the Cue Lever to put the Tonearm onto the record. Turntable will begin playback.
10.
Turn the /- Tuner to adjust the volume. To pause/stop during playback, raise
the
Cue Lever to lift the Tonearm off the record.
11.
When finished listening:
a.
Raise the Cue Lever to lift the Tonearm off the record.
b.
Move the Tonearm to its support.
c.
Lower the Cue Lever to release the Tonearm.
d.
Lock the Hold Down Clip.
Note
:
•
Pull out the Aux in cable before playing a vinyl, or the unit will switch to AUX mode
automatically.
•
Put the 45 RPM Adapter across the Turntable Spindle firstly if playing a 45 RPM record.
•
After you play 78 RPM vinyl record, it will stop in about
12
0 seconds.