5
Do not allow corrosive foodstuffs such as fruit juices, vinegar, mustards, pickles,
mayonnaise, etc., to remain on stainless steel for long periods. Wash and rinse away.
Do not leave steel objects or utensils standing on the stainless steel surfaces for long
periods. They can rust and leave marks.
After cleaning with detergent always remove residues with a wet cloth and wipe dry, if
left they can have an etching effect on the surface.
REMOVING AND REPLACING TOP HUNG DOORS
(a)
Remove the door bar from the
bottom of the doors, by lifting
one end up and removing.
(b)
Grip the sides of the outer door
and hinge out (1) until the door
can be lifted off the track (2)
and removed from the
cupboard (3), repeat with the
second door.
(c)
Reverse the process to reattach
the doors ensuring that the
correct door is refitted first,
ensure the doors are fitted
correctly by sliding them left to
right.
Simplified cutaway drawing
of Hot Cupboard
CORRECTLY APPLIED THE ABOVE INSTRUCTIONS WILL RESULT IN CONTINUOUS GOOD
LOOKS!
5. MAINTENANCE
&
SPARES
IMPORTANT: You must disconnect the appliance from the mains before removing any
components which have been fastened using screws, etc.
It is advisable to lubricate the doors once or twice a year with petroleum jelly in order to
keep them sliding smoothly.
Remove the doors (as above in cleaning) and put a small amount of lubricant on the
wheel / track that is fixed to the door. Replace the door and slide from side to side for an
even distribution of the lubricant.
You should have the various items in your unit tested for electrical safety at least once a
year as required by the Electricity at Work Regulations.
