VictelGlobal AK-861-4T, Service Manual

Page: 19 / 31

Service Manual
18
Device Massage
 Press the knob and enter “Device Massage”.
 You can check the ESN code, factory date (Date), operating frequency
(Freq), program version (CCM,RTM,CLB) and other information of the
equipment.
LANGUAGE
 Press the knob and enter “LANGUAGE”.
 You can choose Chinese or English. After the adjustment, display language
will switch to the language you choose.
Connecting to the PC
For more settings and information about the equipment, please use the software t
o read and reset.
Here is the illustration of the programming cable. It consists of two cables (
① 、
③
,pay attention to different interfaces) and a programming panel ( );After
②
conn
ecting, connect cable
①
to the PC with the USB end. If the programming
panel(
②
) lights up red, connection is working. When you are reading data, the
other light on panel is flashing green.
Note：
1. CTCSScanonlybesetunderanalogconventionalmode.
2. TXCTCSSfrombasestationshouldbecorrespondedtotheRXCTCSSof
thereceivingterminal,whiletheRXCTCSSofbasestationcorrespondto
theTXCTCSSofthereceivingterminal.