Service Manual
28
Care and Cleaning
To guarantee optimal performance of the base station, and prolong its service life,
please read the following advice carefully for guidance on daily care and cleaning
of the product.
- Care
To facilitate good ventilation and emergency maintenance, allow about 10cm
access between the base station and the surrounding walls.
Do not place anything which might spill over on top of the base station.
Do not puncture or scratch the base station surface with hard, sharp objects.
Do not store the base station in environment with corrosive electronic circuit
materials.
Do not immerse the base station into corrosive agent, solution or water.
- Cleaning
De-dust components of the base station regularly with clean and dry lint free
cloth or brush, in order to maintain their cleanness and avoid bad contact.
When the power key, control knob, display screen and interfaces get dirty,
4.Background noise
Check whether there is any interference. When there
is no on-going call, check the background noise.
The voice is
unclear.
1.Weak signal
Check the field strength value, you may be on the
edge of coverage.
2.There may be
some interference.
Use another frequency and see whether you hear
clearer voice.
3.Background noise
too high.
Adjust the RSSI threshold to filter undesired signals.
Ensure your desired signal is 12dBm above the
RSSI threshold.
Summary of Contents for AK-861-4T
Page 1: ......
Page 31: ...Service Manual 30...
