Victaulic RG1210, Operating And Maintenance Instruction Manual

Page: 6 / 24

INTRODUCTION
NOTICE
• Drawings and/or pictures in this manual
may be exaggerated for clarity.
• The tool, along with this operating
and maintenance instructions manual,
contains trademarks, copyrights, and/or
patented features that are the exclusive
property of Victaulic.
The Victaulic RG1210 Roll Grooving Tool is a
portable tool that can be used in conjunction
with a power drive for grooving pipe to be
compatible with Victaulic grooved piping
products . The standard RG1210 tool is equipped
to groove 2–8 inch/60 .3–219 .1 mm Schedule
40 and 2–4 inch/60 .3–114 .3 mm Schedule 80
carbon steel pipe to Victaulic’s proprietary OGS-
200 groove specifications .
CAUTION
• This tool must be used ONLY for grooving
pipe with specifications that fall within
the designated parameters.
• Verify that the upper and lower grooving
rolls are a matched set.
Failure to follow these instructions could
damage the tool and cause product failure,
resulting in property damage or personal
injury.
RECEIVING THE TOOL
RG1210 tools are packed individually in reusable
containers . Save the original packaging for
return shipment of rental tools .
Upon receipt of the tool, ensure that all
necessary parts are included . If any parts
are missing, contact Victaulic .
CONTAINER CONTENTS
Qty. Description
1
RG1210 Roll Grooving Tool
1 Adjustable Ratchet with Swivel Handle
1 27 mm Deep Socket
1 Roll Set for 2–3 inch/60.3–88.9 mm pipe
1 Roll Set for 4–6 inch/114.3–168.3 mm pipe
1 Roll Set for 8 inch/219.1 mm pipe
1 Power Drive Adapter
2 Support Arm
1 Leg Assembly
3 Hex Key (4 mm, 8 mm, 10 mm)
1 Go/No-Go Groove Diameter Tape
1 Groove Confirmation Gauge Set
10 Shear Pin
1 Shear Pin Punch
2 Operating and Maintenance Instructions Manual
RETURNING THE TOOL
Prepare tool for shipment as received . Contact
Victaulic with questions .
6 REV_A
TM-RG1210 / Operating and Maintenance Instructions Manual