UG:121
Page 2
Standard Features
n
n
Power Factor Correction: Typically 0.98 (>75% Load)
n
n
Universal Input: 85 – 264V
AC
, 47 – 500Hz, or 120 – 300V
DC
n
n
Power Output: 800W at 230V
AC
(200V
AC
minimum input); 500W at 115V
AC
(100V
AC
minimum input)
n
n
Up to six isolated outputs (two slots)
n
n
Fan cooled
n
n
Full power to 45°C; half power at 65°C
n
n
Soft start for limiting inrush current
n
n
Conducted EMI: FCC Class A; EN55022 Class A (consult factory)
n
n
Harmonic Distortion to EN61000-3-2
n
n
AC Power OK status signal
n
n
RoHS compliant available
n
n
Output Sequencing and General Shut Down
n
n
Autosense (Refer to pages 6 and 14 for more information on Autosense)
n
n
Output overcurrent protection on all outputs
n
n
Output overvoltage protection and output overtemperature limiting
(not applicable when using VI-J00)
n
n
Ride-through (hold-up) time: >20ms at 500W load
n
n
Size: 1.86 x 5.06 x 10.4in [47,3 x 128,5 x 264,1mm]
n
n
Safety Agency Approvals: CE Marking, TÜV CUE (certain models may not have all listed approvals)
n
n
Uses 300V
DC
input VI-200™/VI-J00™ modules and/or 375V
DC
input Maxi/Mini/Micro modules
n
n
Power good status signal when Maxi, Mini, or Micro modules used
Optional Features
n
n
I/T/H-Grade output converters
n
n
Current Share Board for unit to unit power sharing - see pages 22 – 23
n
n
Connector kits (# 19-130044)
n
n
MI Chassis Specific
n
n
Mil-STD 810 for Shock and Vibration
n
n
Mil-STD 704 and 1399 for overvoltage and transients
n
n
–40°C operation
n
n
Conformal coating - contact factory