background image

 

 

 

 

 

 

   

                  To prevent fire or shock hazard, do not expose the unit   

                   

WARNING 

to rain or moisture. 

 

                The symbol is intended to alert the user to the presence of 
                important operating and maintenance(servicing)   
                instructions in the literature accompanying the unit. 
               
                The symbol is intended to alert the user to the presence of uninsulated 
                "dangerous voltage" within the product's enclosure that may be of sufficient   

 

 

 

          magnitude to constitute a risk of electric shock to persons. 

 

 

 
  Warning -- This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential area 
is likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense. 
 
Caution -- Any changes or modifications in construction of this device which are not expressly 
approved by the party responsible for compliance could void the user's authority to operate the 
equipment. 

XX135-00-00 Rev 1103 VC565DN Cameras 

 

Summary of Contents for VC565DN





















Reviews: