40
-
Remote directory: Specify the path to the directory where the uploaded images will be stored. If
this directory does not already exist on the FTP server, there will be an error message when
uploading.
-
User name/Password: Provide your log-in information.
-
Enable time folder: Check to create a folder in the FTP server; then select the type of folder by day
(daily), Hour (hourly) or Minute (every minute). Note that user must be authorized to create the
folder.
• JPEG Setting
-
Pre-event: A pre-event buffer contains images from the time immediately preceding the event
trigger. These are stored internally in the server. This buffer can be very useful when checking to see
what happened to cause the event trigger.
Enter the desired total length in seconds, minutes or hours, and specify the required image
frequency.
-
Event: Specify the required image frequency (1
˜
2 fps) for the event when it is detected.
-
Post-event: This function is the counterpart to the pre-trigger buffer described above and contains
images from the time immediately after the trigger. Configure as for pre-event.
-
Prefix file name: This name will be used for all the image files saved. If suffixes are also used, the
file name will take the form <prefix>.<suffix>.<extension>.
-
Additional suffix: Add either a date/time suffix or a sequence number, with or without a maximum
value.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.
