11
Extension cable
NO
Item
Description
1
RJ-45
Ethernet, RJ-45 port compatible
with 10/100Mbps PoE Modular Jack
2
DC Jack
Main Power, DC Jack, 12 VDC
Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-over cable is
used for directly connection to PC, while a direct cable is used for connection to a hub. You can also use a
router featuring PoE (Power over Ethernet) to supply power to the camera.
Connecting the Power
Connect the power of 12 VDC for the network camera. Connect the positive (+) pole to the ‘+’ position and
the negative (-) pole to the ‘-’ position for the DC power.
-
Be careful not to reverse the polarity when connecting the power cable.
-
A router featuring PoE (Power over Ethernet) can also be used to supply power to the
camera.
-
For the power specifications, refer to the Appendix, Product Specification.
-
Power for PoE switch must be turned off if using 12 VDC.
