38
2) Event-Out
SMTP (E-Mail)
The network camera can be configured to send event and error email messages via SMTP (Simple Mail Transfer
Protocol).
• SMTP (E-Mail) Setting
Select “Enable SMTP” to activate the SMTP operation.
-
Sender: Enter the email address to be used as the sender for all messages sent by
the network camera.
-
Image attachment: Check this box if attaching an image to the email. The Interval and Aggregate
fields are removed.
- Interval: Represents the frequency of the email notification when an event occurs.
-
Aggregate events: Shows the maximum number of emails sent within each interval.
Use Mail Server: Check the box is you are using a mail server to receive event notification and
image email.
* Mail Server: Enter the host names (or IP addresses) for your mail server.
* Port: Enter the port number for your mail server. Enable the sending of notifications and image email
messages from the network camera to predefined addresses via SMTP.
-
Enable use (SMTP) authentication: Check the box if your mail server requires authentication.
* User name/Password: Enter the User name and Password as provided by your network administrator
or ISP (Internet Service Provider).
* Login method: Choose a log-in method in the drop-down list: AUTH LOGIN/AUTH PLAIN
