56
•
SMTP (E-Mail) Test:
User can check the SMTP setting via a sample email.
–
Receiver:
Enter an email address and click the Test button to test that the mail servers
are functioning and that the email address is valid.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button to clear
all of the information you entered without saving it.
∇
FTP & JPEG
When the network camera detects an event, it can record and save images to an FTP server. Images
can be sent as e-mail attachments. Check the
“Enable FTP” box to enable the service. This
camera can support multiple FTP servers and user can configure each server settings separately.
•
FTP Setting
•
Server:
Enter the
server’s IP address or host name. Note that a DNS server must be
specified in the TCP/IP network settings if using a host name.
•
Port:
Enter the port number used by the FTP server. The default is 21.
•
Passive mode:
Under normal circumstances the network camera simply re-
quests the target FTP server to open the data connection. Checking this box issues
a PASV command to the FTP server and establishes a passive FTP connection,
whereby the network camera actively initiates both the FTP control and data
connections to the target server. This is normally desirable if there is a firewall between
the camera and the target FTP server.
•
Remote directory:
Specify the path to the directory where the uploaded images will
be stored. If this directory does not already exist on the FTP server, there will be an
error message when uploading.
•
User name/Password:
Provide your log-in information.
Summary of Contents for V8360W Series
Page 94: ...Rev A ...
