49
-
Standard Type:
Intelligent Motion Detection, Intrusion Detection, Tampering
-
Advanced Type:
Intelligent Motion, Intrusion Detection, Tampering, Line Cross/Counting,
Loitering, Object Left/Removed. Wrong Direction, Crowd Detection. Includes Human/Vehicle
classification.
•
View Rule:
In setting VA Event, users can select events to be displayed in Video Preview
window.
•
Object:
Users can set Object settings.
-
Sensitivity allows users to set the object sensitivity to be detected; a larger value increases
the detection sensitivity. If there is a lot of noise (shaking leaves, etc.) on the screen, lower
the Sensitivity value.
-
Users can set the object size to be detected by Min / Max size adjustment.
-
Select Show object size to display the object size set in Video Preview window.
NOTE:
Object size recommended settings
-
Indoor installation (32.8 ft/10m distance, based on average height): Sensitivity 80, Min width
size 2, Min height size 6, Max width size 50, Max height size 60.
-
Outdoor installation (98.4 ft/30m distance, based on vehicle): Sensitivity 80, Min width size 2,
Min height size 4, Max width size 60, Max height size 50.
Situation
Default set image
Recommended
settings
Modified set image
Two
objects
are
detected
as one
In this scene, two
objects are detected as
one. This is usually due
to the maximum size of
the object that is not set
correctly. Reduce the
maximum size of the
object.
Generally, when
setting the
minimum and
maximum sizes, the
average size should
be set to the
minimum size of the
object, half the
width and height of
the object, and the
maximum size of
the object should
be about 130% of
the width and
height of the
average object.
By adjusting the
maximum size, two
people are detected as
separate objects.
One
object is
detected
as two
In this scene, one
object is detected as
two objects. Usually
this is because the
minimum and maximum
sizes are set
incorrectly. Increase
the minimum and
maximum size of the
Generally, when
setting the
minimum and
maximum sizes, the
average size should
be set to the
minimum size of the
object, half the
width and height of
the object, and the
maximum size of
the object should
be about 130% of
the width and
height of the
average object.
Increasing the minimum
and maximum sizes will
ensure that objects are
accurately detected as
one.
Summary of Contents for V8360W Series
Page 94: ...Rev A ...
