2-6
|
Chapter 2 Installation
Surveyor MKII HD Network Dome
Accessory Kits
There are different accessory kits included with the different configurations of
Surveyor MKII; these kits provide the necessary items for installation as
follows:
Description
Quantity
2-position terminal block
1
4-position terminal block
1
8-position terminal block
1
Note
A packet of anti-seize lubricant is included with the outdoor pendant and
high-impact models; the lubricant is used for sealing and to prevent galling at
the end of the 1.5-inch NPT pipe on the outdoor pendant model. Refer to the
Detailed Installation sub-section of the Installation section for details on
applying the lubricant. The high-impact version also includes a bit that fits the
tamperproof screws.
Refer to the Wiring section of this manual for details on using the supplied
removable termination blocks.
Unpacking
All Vicon equipment is tested and inspected before leaving the factory. It is
the carrier’s responsibility to provide suitable delivery.
Inspect the cartons upon delivery and, if damage is present, make detailed
notes on the carrier’s bill. Then, obtain the carrier agent’s signature and file a
damage claim as soon as possible.
Open the cartons and inspect the equipment for damage. Save the cartons
and packing material. If damage is present, contact the carrier and file a
damage claim immediately. If the equipment must be returned for repair,
follow the instructions in the Shipping Information section of this manual.
Remove the Accessory Kit, the Customer Interface (CI) board and the unit
components from the box. Open the Accessory Kit and verify the hardware
contained in the kit against the preceding table.
