1-2
|
Chapter 1 Introduction
Surveyor MKII HD Network Dome
General Information
The information in this manual covers the installation and operation of the
Surveyor MKII Network Dome.
Note
Read all instructions before beginning any installation.
The Surveyor MKII Network Dome is a compact network dome comprised of
a camera/lens and pan/tilt drive in an attractive covert enclosure.
It is sold in a variety of prepackaged configurations with choices in
environment, mounting configuration, and lower dome types. Refer to Table 1
for a complete list of model numbers. The term Surveyor MKII refers to all
domes in this series unless specifically stated otherwise.
The Surveyor MKII Network Dome provides network video transmission
using high-profile H.264 or M-JPEG compression. The dome supports ONVIF
Profile S open architecture connectivity to enable integration into third party
Video Management Systems (VMS), including Vicon’s Valerus and ViconNet.
The Surveyor MKII Network Dome is designed for easy installation and
serviceability. The entire drive assembly simply snaps into the housing.
When removed, the mechanism retains all programmed functions in its on-
board memory. The customer interface board snaps down for easy access
and the PCB provides removable terminal blocks for simple wiring
connections. The camera dome offers variable speed with stepping motors,
continuous rotation and preset positions. Power to the units can be provided
by PoE+ (Power over Ethernet Plus). Additionally, two fiber versions, multi-
mode and single-mode, and a version for NTCIP are available.
The Surveyor MKII Network Dome includes a high-definition 2.0 megapixel
day/night camera with wide dynamic range (WDR) and digital noise reduction
(FNR). See Technical Information for camera features. Camera image
settings are configured via a user-friendly web browser interface.
All versions use the same firmware for programming and operation. For
programming, refer to the most recent version of Web Browser Manual. The
Surveyor MKII Network Dome is compatible with the SVFT-UWM and SVFT-
WM Wall Mounts, SVFT-URM-1 Roof Mount, and SVFT-UPM-1 Parapet
Mount.
Surveyor MKII meets requirements for an FCC Class A computing device
and is UL and CE compliant. Surveyor MKII complies with the fire code of
certain local municipalities. The fire code for any given municipality should be
verified for Surveyor MKII’s compliance at the installation site.
The electronic components within the Surveyor MKII are sensitive to damage
from ESD (Electro-Static Discharge). Appropriate precautions and proper use
