XX137-65-00 Rev 1107 Roughneck V910 Dome Cameras with PoE
Installation
•
17
3.2. Nucleus authentication - On the
Nucleus admin login
field, enter a valid Nucleus IP address
and password and press the
Login
button. Once approved, notice that the
icon has
disappeared from
all
the units currently connected to the selected Nucleus and the user may
proceed to next phase.
4. Press the
Select
button on the lower section of the screen.
Note: You MUST click the Select button to add the unit to the list; verify that it is added to the list.
5. The selected unit appears on the
Selected unit
section on the top of the screen and settings can be
changed.
Unit TAB
The Unit TAB allows the user to change the following settings: Unit name, Nucleus IP address, IP address,
Net mask, Gateway, DNS, DHCP, Time Zone, daylight saving time, Local time, Local date, and Debug level,
on a scale of 0-4, where 4 is most information.
Note: The
Apply
button must be pressed for changes to take effect.
Note: Verify all IP addressing parameters with your IT administrator.
Note: In order for the DHCP option to work properly, verify that the server does not expire the IP address
licensed to the camera. (Camera should always receive the same IP address from the DHCP server.)
Select
2
4
3
3.2
Unit
1
