16
•
Installation
XX137-65-00 Rev 1107 Roughneck V910 Dome Cameras with PoE
Setup TAB
Note: Since the Setup configuration affects the entire installation process, it MUST be configured first.
In the Setup TAB, 3 fields are defined. The
Upgrade files
field indicates the installation upgrade directory. The
Log files
field allows the user the ability to put a copy of log files in a predefined directory.
Password
management
selects a directory to save all password files. (By default, the setup files will be installed to
C:\VUG.) In
Password file status
, the number of passwords stored is displayed.
Load a list of passwords
is
intended for very large sites only. Contact Technical Support to use this feature.
Select TAB
The Select TAB allows the user to select the relevant IP Unit in order to change its settings or to upgrade its
version.
1. From the
Unit selection
list, select the relevant IP product. In case of multiple sites, it is advised to use
the filter under the
Unit Type
field. Click on any column tab to sort names by that definition in ascending
or descending order.
2. Once the desired unit has been selected, notice the
icon, indicating a password protected unit. In
order to change the selected unit’s settings on the local PC that is running the VNSetup, a unique
password must be entered. The screen will display how many units there are and how many of those
are password protected (locked). A remote unit, as in systems using network routers and VLANS
(virtual LANs), will not display in the Unit selection list. If you want to select a remote unit, manually
enter the IP address in the
IP address of remote unit
field and click
Find remote unit
. The remote unit is
added to the list.
Note: This is correct for BIOS from version 1.0.10.86 and later (ViconNet version 3 and higher).
3. Password authentication
There are two authentication options. You can either authenticate a specific unit, by entering its
password, or use a Nucleus authentication, allowing you access to all units in the network.
3.1. Unit authentication - On the
Unit password
field, enter the unit password and press the
Add
password
button. Once approved, notice that the
icon has disappeared and the user may
proceed to next phase. The password will be saved on this unit.
Note: The unit password is supplied on the sticker with the MAC address in the camera package.
Setup
