14
•
Installation
XX137-65-00 Rev 1107 Roughneck V910 Dome Cameras with PoE
Day/Night
The user can select how the day/night function is set for changing from color to black-and-white:
AUTO (default): Color
BW Level 20 to 35 (default is 32); BW
Color level 0 to 10 (default is 5).
Color
BW
Exit Menu
When selecting Exit, the user can:
EXIT NO CHANGES: Exits the menu system without making any changes
SAVE NEW AND EXIT: Save all changes made before exiting the menu system
RESTORE FACTORY SETTINGS: Revert all settings back to factory defaults
SW REV: Version information
Figure 9
WDR Board Adjustments
Final Installation
After all cable connections are made, test the camera/lens to see if any further adjustments are necessary.
Align the viewing slot in the mask with the camera/lens assembly. Reattach the cover to the base by aligning
the four captive screws with the holes in the base. Any alignment of holes and screws is acceptable. The
cover can be rotated 90° by aligning the screws/holes differently.
Configuring ViconNet
The following information is provided for installing ViconNet for the V910 IP dome. The V910 IP camera dome
is shipped with one CD that contains the ViconNet version 4 software needed to setup your IP system,
including the application setup, the camera firmware and setup software (VNSetup). Be sure the ViconNet
Workstation meets the minimum requirements, is running the ViconNet application (version 4) (VNSetup) and
has the proper PTZ camera driver. The VNSetup is found on the included CD under software, IP Camera
Setup. Refer to appropriate ViconNet documentation.
