9
⚫
Quick Installation
Below is an overview for installing the camera.
1) Installation (without Rear Cover)
1.
Use camera mounting frame as template to mark mounting holes on mounting surface. (Fig.1)
2.
Drill holes for mounting base and a minimum 3/4 in. hole for routing wines. (Fig.1)
3.
Mount camera mounting frame using appropriate hardware for mounting surface. (Fig.2)
4.
Route wires through hole in wall and out through base plate. (Fig.2).
5.
Terminate wires to camera board.
6.
Mount front plate to base plate. (Fig.2)
