Vicon Roughneck Pro V2000D Series, Quick Manual

Page: 8 / 26

Outdoor Dome Series | Quick Guide
7
Table 1 - 2: Internal Interface Index Description
No. Name Description
1
DI/DO Port
DI/DO (Digital Input/Output) ports are equipped for external devices,
e.g., smoke detector, siren, microphone.
•
Alarm In : Via “GND” and “AI” ports; connect to external
device that can trigger alarm input signals.
•
Alarm Out : Via “COM” and “AO” ports; connect to external
device to be triggered through alarm output signals.
•
Audio In : Via “+“ and “ ” ports; connect to external device
such as microphone that receives sound for camera.
•
Audio Out : Via “+“ and “ ” ports; connect to device such as
speaker to transmit sound for camera.
2
Micro SD card slot
Insert a micro SD card (customer supplied) into the slot for recording
and file storage
3
Video Output
For analog video output (5 MP/8 MP models only).
4
Status LED
Solid Red
Indicates boot up is running. After 2 ~ 3
seconds:
-
Solid Red to Flashing Green if boot up is
normal.
-
Remains Solid Red if an error occurs.
-
Turns off 3 minutes after a successful boot.
Flashing Amber Indicates firmware upgrade is running.
5
Default & Reset
Button
Default (D) : Press the button for 6 seconds to restore the camera’s
settings to factory default.
Reset (R) : Press the button for less than 1 second to reboot the
camera.
6
LED Indicators
Solid Green Indicates a live connection is established.
Flashing Orange
Indicates data is being transmitted/received
between camera and the network.
7
Power Terminal
The port is used to connect with external power supply, either 12 VDC
or 24 VAC.
8
RJ-45 Network
Port
Connect the RJ-45 connector to this port with a PoE (Class 3)
compatible network device that supplies power through the Ethernet
cable.