Outdoor Dome Series | Quick Guide
15
2.2.6 Reassembling the Camera
Assemble the camera housing with the camera bottom base, both of which have red dots for indicating
alignment; then fasten the 3 screws of the lower dome with the T20 security torx bit to complete the
installation.
Note: To avoid moving the tilt position, take care to angle the lower dome below the camera module when
installing the lower dome.
Figure 2 - 9: Assembling and Completing Camera Mounting
Tightening torque:
7 ~ 9 lb/in.
(8 ~ 10kg/cm)
Summary of Contents for Roughneck Pro V2000D Series
Page 26: ...8...
