Chapter 6
Maintenance
Periodic checking and maintenance of certain parts of your Kollector Pro will minimize future system
problems. The following table lists the items that need to be checked and when.
Maintenance Required
Monthly
Annually
Replacing the filter
9
Cleaning the filter
9
Backing up
9
Checking the front and rear
fans
9
To replace the filter:
1. Turn the Kollector Pro off, and then open the front door.
2. Open the filter housing on the left-hand side.
3. Carefully remove the old filter, and then replace it with a new 105mm x 175mm filter.
4. Close the filter housing.
5. Turn the Kollector Pro back on, and then close the front door.
To clean the filter:
1. Turn the Kollector Pro off, and then open the front door.
2. Open the filter housing on the left-hand side.
3. Carefully remove the old filter, and then wash it under running water with a mild soap.
4. When the filter is completely dry, return it to its place in the Kollector Pro.
5. Close the filter housing.
6. Turn the Kollector Pro back on, and then close the front door.
To back up the Kollector Pro:
•
Refer
to
Chapter 3, Configuring the ViconNet System
in the
Kollector Pro Software Manual
(XX128-3X)
NOTE: The backup procedure should be performed whenever a change is made to the system settings.
XX128-05-00 Rev 908 Kollector Pro Network Digital Video Recorder
Maintenance
•
19
