Rear Panel Controls and Connections
The following picture shows the Kollector Pro rear panel. Each panel component is described below.
Figure 3-2: Rear Panel Layout
The Kollector Pro's rear panel contains the following components:
•
Video Looping Outputs:
DB-15 connectors used with provided cables to loop the video inputs out.
•
Video (Camera) Inputs:
Standard BNC-F connectors used for analog camera video input.
•
Power Switch:
Used to power on and off the power supply of the recorder.
•
Power Receptacle:
Used to connect the provided Power Cable.
•
Power Voltage Switch:
On 30, 60 and 120 fps models, the input voltage is selectable. The unit comes
from the factory set correctly for either 115 VAC or 230 VAC. The voltage value is displayed on the
switch. The setting can be changed, using a small screwdriver, if necessary. Be sure to disconnect power
from the unit before changing the voltage switch.
•
Keyboard Port:
A mini-DIN type connector used to connect a standard PC keyboard (not included).
•
Mouse Port:
A mini-DIN type connector used to connect the provided optical mouse.
•
USB Connectors:
Used for optional devices.
•
Parallel Port:
Used for general printing.
XX128-05-00 Rev 908 Kollector Pro Network Digital Video Recorder
Installation
•
7
