Vicon KOL-3000 Operation Manual Download Page 66 | Manualshive

Page: 66 / 103

Vicon KOL-3000 Operation Manual Download Page 66

* Procedure for CD-RW backup (Optional )

A. Installation of CD-RW Drive

1. CD-RW

Driver

Installation

    Install CD-RW Driver software supplied by the manufacturer in Kollector
system
    (The driver for the HP-9200e CD-RW Drive is already installed in the
system).
2.   Turn off the Kollector system power.
3.   Connect CD-RW to Kollector system.
4.   Turn on the CD-RW power.
5.   Turn on the Kollector system power.

B. Data Backup and Review

1.   Follow the steps described in Operation Manual Page 60 ~ 61.
2.   After the backup, remove CD from the drive.
3.   Insert CD to CD Drive in your PC.
4.   Using Windows Explorer, look for the file "D:

Disstech

Bin

Dissviewer.exe" ( D is CD-ROM drive) and double click it.

*Note

The following instruction is only for the case when a empty CD(without format) is
inserted.

When a empty CD is inserted to CD-RW drive, the following screen appears.

«
...
64
65
66
67
68
...
»

Summary of Contents for KOL-3000








































































































Reviews:

No comments